Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Sunrise Manor?
Chimney liner work in Sunrise Manor typically runs $2,200 to $5,800 for a standard single-story home, and a partial masonry rebuild usually lands between $4,500 and $14,000 depending on how much of the stack is compromised. The number that matters is which of those two categories your chimney actually falls into. A deteriorating flue liner and a failing outer structure look similar from the roofline, and the price difference between resurfacing a liner and tearing down brick is where most homeowners get surprised.
We inspect first, then quote. Our technicians have up to experience diagnosing exactly this question on Sunrise Manor homes, and the written estimate that follows is what you pay. No customer walks away guessing.
Key Takeaways
- Liner installations in Sunrise Manor run roughly $2,200-$5,800; partial rebuilds $4,500-$14,000.
- HeatShield resurfacing can restore a cracked flue liner for a fraction of a full rebuild, when the liner is structurally sound enough to accept it.
- DuraFlex flexible relining brings older and prefabricated chimneys up to code-compliant performance without demolition.
- Estimates are free, and the price is set per job by the written estimate, not by a phone description.
- Desert temperature swings in Sunrise Manor stress masonry differently than wet climates, and that shows up in the pricing.
Chimney Liner & Rebuild Cost Breakdown (2026)
These are typical ranges for the Sunrise Manor market in 2026. Every chimney is different; the written estimate sets your final price. What we can tell you is where the money goes.
| Line Item | Typical Range (Sunrise Manor, 2026) |
|---|---|
| Flue liner inspection and video scope | Included in the estimate |
| Standard masonry chimney sweep (prep for liner work) | $175 – $325 |
| HeatShield flue liner resurfacing | $1,400 – $3,200 |
| DuraFlex flexible stainless liner, single-story | $2,200 – $4,600 |
| DuraFlex liner with insulation wrap, single-story | $2,800 – $5,800 |
| Two-story or extended-run liner installation | $3,600 – $7,400 |
| Crown repair or rebuild | $650 – $1,900 |
| Top-corner and upper masonry rebuild (partial) | $4,500 – $14,000 |
| Full chimney rebuild with new liner | $12,000 – $24,000 |
| Firebox repointing and repair | $550 – $1,800 |
| Dryer vent cleaning (added to the same visit) | $150 – $275 |
What pushes a job toward the top of those ranges: height. A single-story ranch with a short exterior stack is the cheap version of this work. A two-story home on a sloped lot, where the liner run is long and the flue has a bend in it, costs more because the materials and labor both climb. Access matters too. If a roof is steep or the chimney sits tight against a parapet, technicians spend more time on setup before any liner work starts.
What pulls a job back down: catching the liner before the masonry itself fails. A flue liner that’s cracked but surrounded by sound brick is a repair. A flue liner that’s cracked because water and thermal movement have already broken the outer structure is a rebuild. Everything in between is a judgment call, and it should be made on a video scope, not a glance from the driveway.
Why Rebuilds Cost So Much More Than Liners
A rebuild is demolition plus masonry plus a new liner plus a crown, in that order. Each layer costs money, and each layer has to cure before the next one starts. The liner itself is often the smallest line item on a rebuild invoice, which is exactly why we push so hard on liner repair when the structure underneath is still sound. Restoring a liner you can restore saves thousands.
What Affects Chimney Liner & Rebuild Pricing in Sunrise Manor
- Desert temperature swings. Sunrise Manor sees hot summer afternoons and cold winter nights, and masonry moves with every one of those cycles. That expansion and contraction opens hairline cracks in mortar joints, and those cracks let water in. A chimney stressed this way is more likely to need crown repair alongside liner work.
- Monsoon-season water intrusion. Summer storms here arrive fast and hit hard. A cracked crown or a missing cap channels that water straight into the flue structure. What looks like a liner problem on a Sunrise Manor roof is often a drainage problem that’s been working on the masonry for a few seasons.
- Stucco-finished exteriors. Many homes in this part of the Las Vegas Valley have stucco over masonry or framed chimney chases. Stucco hides the condition of what’s underneath until someone gets up there and probes it. That can mean a quote shifts once the exterior finish comes off, which is why we inspect before we price rather than after.
- Chimney height and liner run length. Longer runs need more liner material and more labor hours. A tall stack on a two-story home runs several hundred dollars beyond the same job on a single-story.
- Wood-burning insert or open fireplace. An insert usually has a smaller, dedicated flue, which can sometimes make relining more straightforward. An open masonry fireplace with a wide flue may need a different approach entirely.
- Condition of the firebox and smoke chamber. If the firebox needs repointing or the smoke chamber needs parging, that’s added scope. Skipping it and installing a liner over a failing firebox just moves the problem.
- Material choice. We source and install from a curated portfolio of professional-grade brands – DuraFlex, HeatShield, Gelco, Famco, Copperfield, and Olympia Chimney – the same lines certified chimney specialists use. Generic hardware-store materials don’t belong in a safety-critical venting system, and the price difference between them and professional-grade product is smaller than most people expect.
Liner Repair vs. Full Rebuild: How We Decide
The single biggest cost decision on a chimney job is whether the liner can be restored or has to be replaced with the surrounding masonry. Here’s how that breaks down in practice.
When HeatShield Makes Sense
HeatShield is a restoration system that resurfaces a cracked or spalled flue liner from the inside, without demolition. When the liner is deteriorating but the surrounding masonry is still structurally sound, this is often the right answer. It costs a fraction of a rebuild and it addresses the actual failure. Not every liner qualifies – if the damage is too far gone, resurfacing won’t hold – but when it does, it’s the difference between a repair and a teardown.
Most sweep companies can’t offer this. We can, and we apply it as a restoration option, not a sales pitch.
When DuraFlex Relining Is the Right Call
When a liner is beyond resurfacing, or when a chimney never had a proper liner to begin with (common in older Sunrise Manor homes), a DuraFlex flexible liner system brings the flue up to code-compliant performance. It’s installed from the top down, fits the existing flue shape, and doesn’t require tearing out the masonry to get it in. For prefabricated chimneys with failed liners, it’s often the only practical path short of replacement.
When a Rebuild Is Unavoidable
If the outer masonry has separated, if the chimney is leaning, or if a freeze-thaw or monsoon event has taken out the crown and the top courses of brick, the structure has to come down and go back up. There’s no honest way around it. What we do in those cases is give you a clear scope: what gets rebuilt, what gets retained, and what the liner and crown work adds after the masonry is back. That estimate is itemized, so you can see the rebuild cost separately from the liner cost.
How to Save on Chimney Liner & Rebuild in Sunrise Manor
None of these tips replace a proper inspection, but each one can keep a job in a lower price band.
- Catch the liner before the masonry fails. A cracked flue caught early is a HeatShield job. The same crack caught two seasons late can drag the surrounding brick into the repair. Annual inspection is the cheapest line item on the invoice and the one that saves the most.
- Fix the crown and cap first. A crown repair in the $650-$1,900 range can stop the water intrusion that’s causing the liner damage in the first place. If you skip it, the new liner just sits under the same leak.
- Bundle the dryer vent cleaning into the same visit. We handle chimney sweeping, chimney repair, and dryer vent cleaning as a full-scope operation. If a technician is already on site for liner work, adding dryer vent cleaning to the same visit is more efficient than booking a second appointment.
- Get the estimate in writing before any work starts. An itemized written estimate protects you from scope creep on a job where the condition of the masonry can only be fully confirmed once someone is on the roof.
- Ask specifically about resurfacing before you accept a rebuild quote. If a contractor jumps straight to demolition without mentioning HeatShield or a comparable restoration method, get a second opinion.
Estimates are free. Call (833) 486-5098 and we’ll get a technician out to scope the flue and price the actual work. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What to Expect During the Job
A liner installation is usually a same-day job on a single-story home. The technician sweeps and scopes the flue first, confirms the liner path, and then runs the new liner down from the top. Insulation wrap, if it’s specified, goes on before the liner is seated. Once it’s in, the technician verifies the connection at the appliance and checks the cap.
HeatShield resurfacing is also typically one visit. The applicator goes down the flue, the compound is applied to the liner walls, and it cures in place. There’s no demolition and no masonry to wait on.
A rebuild is a multi-day job by nature. Masonry has to come down, the new structure has to go up in courses, and then it has to cure before the crown and liner go in on top. We’ll tell you the timeline in the written estimate so you can plan around it.
One safety note that matters more than any price line: a deteriorated flue liner is a fire hazard, and a chimney with a compromised liner should not be used until it’s repaired or relined. We don’t recommend running a fire in a chimney with a known liner failure while you wait on a rebuild quote. Get the flue looked at first, then decide how to proceed.
Why Material Brand Matters on a Liner Job
A liner is a lifetime component. It sits inside the chimney, exposed to heat, creosote, and moisture, and it’s supposed to last decades. The difference between a professional-grade liner and a cheap one isn’t visible from the outside, but it shows up in how the liner performs over the next twenty years.
That’s why we work from a defined set of brands – DuraFlex for flexible relining, HeatShield for flue restoration, and Gelco, Famco, Copperfield, and Olympia Chimney for the component parts. These are the same products trained chimney specialists install, and they’re the only products we’ll put in a chimney. When you’re spending thousands on a liner, the material inside it is the last place to cut cost.
If you want to understand the broader scope of what we handle, the Paragon Chimney Sweep page covers sweeping, repair, and dryer vent work as three service lines under one roof, with repair done by the same technicians who sweep. No handoffs, no separate crews.
Chimney Rebuild Costs in the Broader Sunrise Manor Market
Sunrise Manor is an established community, and a lot of the housing stock has chimneys that were built decades ago to codes that have since changed. That history shows up in rebuild pricing. A chimney that was originally built without a proper liner, or with a clay tile liner that’s since cracked and spalled, is not a candidate for a simple reline in every case. Sometimes the masonry has to come apart to get the right liner in.
Homeowners in Sunrise Manor also deal with a specific pattern we see again and again: the chimney looks fine from the ground, but the crown is cracked and the top courses of brick are spalling. That’s water damage from above, not fire damage from below. It’s fixable – but it’s a rebuild scope, not a liner scope, and the estimate should reflect that honestly instead of pricing a liner installation on top of failing masonry.
For more on the specific local conditions here, see our Sunrise Manor service page, which covers how the local climate and housing stock affect chimney work.
FAQs – Chimney Liner & Rebuild Cost
How much does chimney liner installation cost in Sunrise Manor?
Chimney liner installation in Sunrise Manor typically runs $2,200 to $5,800 for a single-story home, with two-story or extended runs landing between $3,600 and $7,400. The range depends on liner length, whether insulation wrap is specified, and the condition of the flue. Call (833) 486-5098 for an exact quote – estimates are free.
Is it cheaper to repair or replace a chimney liner?
Repair is almost always cheaper when the liner qualifies for resurfacing – HeatShield restoration typically runs $1,400 to $3,200 versus $2,200 to $5,800 for a full reline, and far less than a rebuild. The deciding factor is whether the surrounding masonry is structurally sound. If it is, restoration is usually the right call. Call (833) 486-5098 and we’ll scope the flue and tell you which category it’s in.
How much does a chimney rebuild cost in Sunrise Manor?
A partial masonry rebuild in Sunrise Manor typically runs $4,500 to $14,000, and a full chimney rebuild with a new liner lands between $12,000 and $24,000. The range is wide because the scope is wide – a top-corner rebuild is a different job from a full stack replacement. The written estimate sets the final price. Call (833) 486-5098 – estimates are free.
Can you come today to inspect my chimney?
Yes, same-day service is often available in Sunrise Manor. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (833) 486-5098 and we’ll get a technician out to scope the flue and price the work.
How do I know if I need a liner or a rebuild?
You need a video scope of the flue to know for certain. If the liner is cracked but the masonry is sound, you’re looking at a $1,400 to $5,800 liner repair or reline. If the outer masonry has separated or the crown has failed and taken the top courses with it, you’re in rebuild territory at $4,500 and up. Call (833) 486-5098 for a free estimate – we’ll tell you which one applies before you commit to anything.
Get a Written Estimate for Your Chimney
Chimney liner and rebuild pricing in Sunrise Manor comes down to one thing: what’s actually wrong with your chimney. A video scope answers that question in under an hour, and the written estimate that follows itemizes the work so you can see the liner cost and the rebuild cost separately. Our technicians have up to experience with exactly this kind of diagnosis, and repair work is done by the same technicians who sweep, so nothing gets passed off to a second crew.
Estimates are free. Call (833) 486-5098 to get a technician out to your Sunrise Manor home. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Sunrise Manor market as of 2026. Paragon Chimney Sweep offers free estimates – call (833) 486-5098.
Written by the team at Paragon Chimney Sweep.
What Our Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Emily Rhodes"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Carmen Martinez"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Daniela Delgado